Amplicomms BTH 1410-NL, User Manual

Page: 26 / 146

Opening/closing the neckloop
It is possible to open and close the neckloop to the receiver base for easier
wearing and removing. This is achieved by gently turning the right part of
the neckloop anti-clockwise 1/8 turn and then pulling the plug out. Re-
assembly is the reverse process.
Troubleshooting
No sound
- Ensure that the receiver power ON/OFF switch is switched to ON.
- The charge level of the battery inside receiver may be too low. Recharge
the battery for approx. 3 hours.
- Ensure that the Bluetooth connection is established.
- The receiver output level is set too low. Adjust the volume to a suitable
level.
Distortion
- The charge level of the battery inside the receiver may be too low. Rechar-
ge the battery for approx. 3 hours.
- The receiver may be too far away from the Bluetooth transmitter (e.g.
smartphone etc.). Move closer to it.
O
PERATION
22
Helpline UK 0844 800 6503
(See page 25 for costs and hours of operation)