Settings and Functions
28
Setting the snooze delay
SNOOZE
0m 5m 15m
Use the sliding switch (18) to set the interval for
the snooze delay. There are three settings
available, from left to right 0 min", 5 min" or
15 min".
Activating the snooze delay
SNOOZE
Press the Snooze button (1) to interrupt the
alarm for a specific time before it
automatically resumes. To activate the
Snooze function, refer to Setting the snooze
delay".
Setting the flashing light
ON OFF
The sliding switch (8) is available with which
to select whether the flashing lamp in the
Snooze button should also be activated
together with the alarm signal set. Two
settings are available, from left to right: ON"
or OFF".
Setting the weekday and time
Press the button (8) 5 seconds in order to set
the weekday and time.
Setting the alarm time and alarm period
Press the button (9) 5 seconds in order to set
the alarm time and active alarm period. You
activate the alarm period with the sliding switch
(24) (Alarm period 1" or Alarm period 2"). If
the sliding switch (24) is set to Alarm period
1 + 2", the function is deactivated.
Increase selection value
Press the button (6) if the value in the display
should be increased by one increment.
Decrease selection value
Press the button (7) if the value in the display
should be decreased by one increment.
Repeat alarm
Press the button (5) while the alarm is
sounding. The alarm is switched off and the
alarm clock sets the same alarm time for the
following day.
Activating the vibration pad
After having connected the vibration pad
supplied, you can use the switch on the
vibration pad to switch the vibration function on
and off. There are two settings available, from
left to right ON" or OFF".
Service−Hotline: Tel. 0844 800 6503 (Monday to Friday 9.00 − 17.00)
