background image

1-866-AMPLICOM (267-5426)

71

G

eneral

 

inFormation

Energy efficient power adapter

The included power adapter meets the eco-design requirements 
of the European Union (Directive 2005/32/EG). 

Disposal

The 

 

symbol on this product indicates that electrical and electronic apparatus 

and battery pack must be disposed of 

separately

 from domestic waste at 

suitable collection points provided by the public waste authorities. 

Technical Details

Standard

 

DECT¹ GAP²

Power supply (base station)

 

Input: 100-240V ~50/60Hz 0.15A

 

 

Output: 6VDC 800mA

Range

 

Outdoors Approx 325 yards/300m

 

 

Indoors Approx 53 yards/50m

Standby

 

Up to 100hrs

Maximum Talk Time

 

Up to 10hrs

Rechargeable battery pack

 

AAA 3.6V 750mAh NiMH in handset unit. 

Dialling mode

 

Tone (DTMF)

  

Pulse

Optimum ambient temperature

 

32˚F to 113˚F (0˚C to 45˚C)

Optimum relative humidity

 

20% to 80%

Recall

 

300, 600 ms

¹  DECT: Digital Enhanced Cordless Telecommunication
²  GAP: Generic Access Profile = standard for the operation of handsets and base stations 

from different manufacturers. 

Summary of Contents for PowerTel 760 Assure















































































Reviews: