1-866-AMPLICOM (267-5426)
37
4. Choose the desired recall timing setting (Short or Long) using
REDIAL
TONE
CID
OGM
MEMO
or
FLASH
and press B or SAVE
.
Insert a dialing pause
Insert a pause before the dial tone if the system requires an outside line which
takes awhile to connect.
To insert a dialling pause using your corded phone, enter the number to reach
the outside line and then press
REDIAL/P
CID/FLASH
OGM MEMO
. A
P
on your display will show dialling
pause is active.
To insert a dialling pause using your cordless handset, enter the number to
reach the outside line and then press
for two seconds. A
P
on the display
will show dialing pause is active.
Note: A dialing pause can be used with a phone number in the phone book.
Set the dial mode
There is a choice of two dialing modes: tone and pulse. The default setting is
TONE and this is the correct setting for use within the United States.
u
se
on
a
private
BranCh
exChanGe
