Amplicom PowerTel 760 Assure User Manual Download Page 60

Page: 60 / 78

Service Center

Note: The light flashes green then red if the wrist shaker is not registered or

is out of range. Bring it closer to the PowerTel telephone to ensure it is with-

in range. If the light still flashes, see page 57 for registration instructions.

Off: Press and hold for about five seconds, until the green light goes off.

4. Turn on SOS Motor feature

The SOS Motor feature causes the wrist shaker to vibrate when a call comes in.

i. At the corded phone base: Press

MENU

(under the display).

ii. Use

REDIAL/P

CID/FLASH

OGM MEMO

to scroll to

SOS

Motor.

Press

MENU

again.

iii. Use

REDIAL/P

CID/FLASH

OGM MEMO

REDIAL/P

CID/FLASH

OGM MEMO

to scroll to

On.

Press

MENU

again.

Saved

is displayed.

Power on/off button

rist

haker

Summary of Contents for PowerTel 760 Assure















































































Search results

Summary of Contents for PowerTel 760 Assure

Reviews:

Related manuals for PowerTel 760 Assure

Brands by name

Popular brands

Amplicom PowerTel 760 Assure, User Manual

Search results

Summary of Contents for PowerTel 760 Assure

Reviews:

Related manuals for PowerTel 760 Assure

Brands by name

Popular brands