Amplicom POWERTEL 49 PLUS, Operating Instructions Manual

Page: 9 / 20

Telephoning
9
5 Telephoning
Taking a call
, or Take the call
Ending a call
or End the call
Making a call
Enter the phone number
(max. 22 digits)
Following incorrect input, press to
delete the last digit
or or Dial the number
It is also possible to lift the receiver first to obtain the dialling tone.
The digits in the phone number then entered are dialled imme-
diately. It is not possible to correct wrong digits individually using
this dialling procedure.
Redialling
Your telephone stores the last phone number dialled.
or , Redial the last phone number dialled
Calling back missed calls
The telephone stores the numbers of the last 32 calls received in a calls
list.
or Select an entry
or Dial the number
Dialling phone numbers from the phone book
There must be phone numbers stored in the phone book Page 13.
Open the phone book
or Select an entry
or Dial the number
One−touch dialling
The quick dial buttons M1 or M2 can be used for normal quick dial num-
bers or as a memory location for automatic emergency call dialling. Phone
numbers must have been stored as quick dial numbers.
Page 15.
or Press the required quick dial button
or or Dial the number
Quick dialling
It is possible to store 10 phone numbers so that they are dialled simply by
pressing three buttons (quick dialling).
Programming quick dial buttons
Press the Save number button
, Enter the phone number
(max. 22 digits) and confirm it
, Enter the name (max. 16 letters)
and confirm it
Enter the memory location number
(e.g. in this case, memory location 0)
Making calls using the quick dial buttons
or Lift the receiver or handsfree
Press the quick dial button
Enter the memory location number
(e.g. in this case, memory location 0)
The phone number stored is automatically dialled.
Adjusting the receiver volume
The receiver volume can be adjusted when the +40 dB volume boost but-
ton is activated.
Adjust the volume with the control knob
Service−Hotline: Tel. 0844 800 6503