background image

Setup Menu

PAGE 12

iPD1280 | ETHERNET PAGING MICROPHONE

T

5. TIME OUT

5. TIME OUT
   

 

5.1 Timeout
 

                          1min

Press “ 0 ” for Enter

Press “ ADD ” for Select

Press “0” for Save

Press ‘0’ to enter this sub menu from 

the main directory.
This is to set the duration that the mic 

to be in active mode.

Setting the timeout would prevent the 

mic being turned on and left idle after 

an announcement is made.
There are time when the mic is 

required to be active for a longer 

period of time, such as making a long 

speech or performing a prayer using 

the PA system

5.2 Display Timeout
 

                          1min

Press “ ADD ” for Select

Press “0” for Save

Press “ CLR ” for Back

6. SYSTEM SETTING

6. SYSTEM SETTING
   

 

6.1 Paging Server IP: 
                           192.168.0.100

Press “ 0 ” for Enter

Press “0” for Enter

6.2 Data Port: 
                                          3000

Press “ 0 ” for Select

Press “ADD” to Next

6.3 IP Address:
 

             192.168.0.101

6.4 Subnet Mask: 
                             255.255.255.0

Press ‘0’ to enter this sub menu from 

the main directory.

To setup the IP address

Return to Main Page

Press “0” to Save

Press “ ADD ” for Next

6.5 Gateway Address: 
                                 192.168.0.1

Press “CLR” for Exit

Press “0” to Save

Press “ ADD ” for Next

Summary of Contents for iPD1280

















Reviews: