Ampcontrol Pty Ltd
– ABN 28 000 915 542
IPD USER MANUAL
IPDB014 Version 14
– SEP/2020
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 67 of 96
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
Earth Leakage Tests
Earth continuity tests
Earth Fault lockout tests
Overcurrent injection tests
Equipment maintenance, repair and overhauls shall also be in accordance with legislation and standards
applicable to the Country and State of use. In Australia to ensure compliance to the legislative
referenced standards AS/NZS2290, AS/NZS3800 and HB239, the manufacturers requirements are as
follows:-
17.2.1 External Inspections
External inspections are to be carried out daily, when mounted externally & visible, or 6 Monthly, when
mounted inside Ex-d enclosures.
17.2.2 Internal Inspections
Internal inspections are
not permitted
- do not open any of the IPD components.
17.2.3 Repair and Overhaul
This is required every 4 years. The following components shall be returned to Ampcontrol for AS3800
inspection, repair and overhaul:-
Integrated Protection Relay IPD - Part # 162131
Remote Display Module RDM-D - Part # 110141
CCMD Cable Connection Module(s) - Part # 110146, 110147, 110148
Remote Termination Unit RTU-D3 - Part # 161575 (where used & available)
Keypad Interface Module IKD - Part # 110142
IS Keypad IKD - Part # 110143
IPSI-D IPD Serial Interface Module - Part # 110144
NOTE
IS battery life (and the interoperability of the IS system components) is
fundamental to reliable operation of the product and maintaining safety
in operation.
CAUTION!
All
ancillary equipment
used with the IPD integrated protection relay
should be as specified in the IPD Equipment List
to ensure safe
operation of the relay.
17.3 Disposal
ENVIRO
The electronic equipment discussed in this manual
must not be
treated as general waste
. By ensuring that this product is disposed of
correctly you will be helping to prevent potentially negative
consequences for the environment which could otherwise be caused by
incorrect waste handling of this product.