manualshive.com logo in svg

Ampair 300, Operation & Maintenance Manual

The Pioneer 300 Operating Instructions Manual is available for free download from our website. This comprehensive manual provides clear and detailed guidance on using the Pioneer 300, ensuring a smooth and efficient user experience. Visit manualshive.com today to access this essential manual and unleash the full potential of your product.

Share
Download
background image

Date: 02 Feb 2011 

Ampair ® 300 (Mk1, “Pacific”) Wind Turbine Manual

 

CD 2300 

Issue: 1.2 

Page 2 of 34 

 

 

 

- 2 - 

© Ampair, April 2007 

 

1

 

INTRODUCTION .................................................................................................................................... 3

 

1.1

 

Labelling ........................................................................................................................................... 3

 

1.2

 

Applications ...................................................................................................................................... 3

 

2

 

SAFETY INSTRUCTIONS ..................................................................................................................... 4

 

2.1

 

Disclaimer: ........................................................................................................................................ 4

 

2.2

 

Potential sources of danger .............................................................................................................. 4

 

3

 

TECHNICAL CHARACTERISTICS ........................................................................................................ 7

 

3.1

 

Required space ................................................................................................................................ 7

 

3.2

 

Technical data .................................................................................................................................. 7

 

3.3

 

System description ........................................................................................................................... 8

 

4

 

INSTALLATION ...................................................................................................................................... 9

 

4.1

 

Installation sequence ........................................................................................................................ 9

 

4.2

 

Wind turbine packing list................................................................................................................. 10

 

4.3

 

Accessories packing lists................................................................................................................ 11

 

4.4

 

Tools ............................................................................................................................................... 12

 

4.5

 

Choosing a mounting...................................................................................................................... 13

 

4.6

 

Electrical installation ....................................................................................................................... 16

 

4.7

 

Electrical components .................................................................................................................... 19

 

4.8

 

Final assembly ................................................................................................................................ 23

 

5

 

OPERATION & PERFORMANCE ........................................................................................................ 25

 

5.1

 

Starting and stopping...................................................................................................................... 25

 

5.2

 

Performance ................................................................................................................................... 26

 

6

 

INSPECTION & MAINTENANCE ......................................................................................................... 27

 

6.1

 

Major disassembly .......................................................................................................................... 27

 

6.2

 

Drawings and component list ......................................................................................................... 31

 

6.3

 

Recommended spares ................................................................................................................... 33

 

7

 

WARRANTY ......................................................................................................................................... 33

 

8

 

SERVICING, REPAIRS, & DISPOSAL ................................................................................................ 33

 

 

 

 

 

 

 

 

Disclaimer: 

The  information  in  this  manual  is  believed  to  be  correct  and  reliable.  However  Ampair  assumes  no 
responsibility  for  inaccuracies  and  omissions.  The  user  of  this  information  and  product  assumes  full 
responsibility and risk. 

All specifications are subject to change without notice. 

Wind turbines, electrical power and battery systems, and wind turbine mounting systems are all capable of 
causing death or serious  injury or fire if incorrectly  installed,  operated, or maintained.  If in doubt,  ensure 
that all activities are carried out by trained and competent personnel. 

 

Summary of Contents for 300



































Reviews:

No comments

Related manuals for 300

ABB A100-L Series Original Assembly Instructions preview
A100-L Series
Brand: ABB Pages: 20
EVEREADY Kestrel 1112-3500-048 Manual preview
Kestrel 1112-3500-048
Brand: EVEREADY Pages: 54

Brands by name

Popular brands

Load more brands