MAN3141
3
FireView Detector Test Kit
4
Controller – Indication & Controls
5
Test Pole Components
6
Battery Charging
1. If the controller does not operate when the LOW LED is lit or the controller’s button is pressed, the
battery is discharged. Charge the battery by inserting it into the charging jack with the dedicated
charger (DC 12V2A).
2. The CHARGE LED lights up while charging.
3. The charging time is approximately 5 hours. When the charging is complete, the red FULL LED will
turn on and the charging will stop. The instrument will not have any problems even if the charging
jack is plugged in for a long time.
4. If a different charger (voltage higher than 12V) is used, it may cause a breakdown or fire. Therefore,
you must use the dedicated charger (DC 12V2A) supplied with the device.
