MAN3069-2
Page 7
Ampac Detectors
Cleaning, Maintenance and Functional Test Procedures
3
Cleaning Instructions for Optical Smoke and Multisensor
Detectors
These cleaning instructions can be applied to Optical Smoke and Multisensor Detectors within all
the Ampac ranges.
Tools Required
Detector Duster 204-0024.
General
If a smoke detector is dirty it should be cleaned without disassembling. Use a commercial
vacuum cleaner with a brush attachment to remove exterior dust and dirt and an air pressure
canister (Detector Duster) to blow through the smoke entry points as illustrated in the image below.
The case can be cleaned with a dampened cloth with a solution of washing up liquid.
Image A
- cleaning a detector with a air pressure canister
UNCONTROLLED DOCUMENT
NOTE: Due to Ampac’s commitment to continuous improvement specifications may change without notice.
Illustration shows Discovery
Multisensor Detector
Illustration shows Discovery Optical
Smoke Detector
