AMP Mitre-Mite VN4 MemoryProgram, Instruction Manual

Page: 30 / 45

30
9 . 2 . e The electronic part does not work
Possible cause Remedy
Machine disconnected from the electric network or
one or more interrupted fuses
t
Connect the machine with the electric network
t
Unscrew the panel located on the rear side of
the oorstand: verify by using a tester the
fuses continuity and replace it if necessary
1. Network lter board M003/x: delayed 4A fuse
(mod. 5x20 glass)
2. Board M021/x....F1 delayed 10A fuse (mod. 5x20 glass)
3. F2 delayed 6,3A fuse (mod. 5x20 glass)
Wrong voltage
t
connect the machine to a 120 V socket
If t h e a b o ve list e d co n d it io n s a re co rre ct a n d t h e fa ilu re st ill e xist s
t call AMP or your local distributor’s Assistance service
9.2.f Wishing to insert several V-nails one upon the other in the same point, they do not
stack properly or tilt during their insertion
Possible cause Remedy
Wro n g V-n a ils
t
re p la ce t h e V-n a ils wit h t h e p ro p e r o n e s
Im p ro p e r cla m p in g , (t h e fra m e m o ve s d u rin g
the insertion of V-nails)
t
verify and if necessary adjust the vertical and
fr ontal clamps positions
t increase the pressure by using the regulator
9.3 REQUEST OF ASSISTANCE
Fo r a n y in fo rm a t io n re g a rd in g Use , Ma in t e n a n ce , In st a lla t io n , e t c.. We re m a in a t yo u r d isp o sa l.
Th e Cu st o m e r h a s t o fo rm u la t e cle a rly t h e q u e st io n s. Ca ll o r Se n d u s a d e t a ile d fa x a b o u t t h e
n a t u re o f t h e
p ro b le m s. Fo r e ve n t u a l e xp la n a t io n s we re co m m e n d yo u m a ke re fe re n ce t o t h is h a n d b o o k
a n d t o t h e in st ru ct io n s list e d in t h e p a ra g ra p h 1.2.
www.fletcher-amp.com
Phone: 1-800-322-4204
FAX: 1-800-426-7019
E-Mail: customerservice@fletcher-amp.com