background image

            Issues

Possible Causes

Solution

Recharge with compatible AC adaptor and check connection and positioning of solar PV panel

Insufficient charging from Solar PV Panel

Check connection and orientation of solar PV panel

Remote control battery is discharged

Replace battery

Battery is inserted incorrectly into remote control Check battery polarity

 The motor has no response

Radio interference / shielding

Ensure remote control and the antenna on the motor are positioned away from metal objects

Receiver distance is too far from Remote Control Move remote control to a closer position

Power failure

Check power supply to motor is connected and active

Incorrect wiring

Check that wiring is connected correctly (refer to motor installation instructions)

Always reserve an individual channel for programming functions
SYSTEM BEST PRACTICE - Provide an extra 15 channel remote in your multi-motor projects that 
provides individual control for each motor for programming purposes

Place all other motors into sleep mode (ref to 

P1

 button instructions)

Cannot program a single 
motor (multiple motors 
respond)

Multiple motors are paired to the same channel.

A M P

  T D B U   R E M O T E  

|

 

P R O G R A M M I N G   G U I D E

14

Troubleshooting

Turnils Contact Information

Turnils North America

1750 Satellite Blvd, Suite 100 
Buford, GA 30518
1.800.252.2512
[email protected]

Turnils Canada

2908 Portland Drive 
Oakville, Ontario L6H 5W8
1.800.268.4540
[email protected]

Quick Index

Settings

Steps

1 Pairing

2 Switch Rotating Direction

Left Up + Left Down (hold down for 2s)

3 Setting Upper & Lower Limits

4 Add / Remove Favorite Position

P2  

>

  Left Stop  

>

  Left Stop

5 Roller Mode & Sheer Mode Switch

Left Up + Left Down (hold down for 5s)  

>

  Stop

6 Adjust Limits

7 Pair / Unpair Additional Emitter

P2 (existing)  

>

  P2 (existing)  

>

  P2 (new)

8 Speed Regulation

Upper Limit:  Up (hold down for 2s)  

>

  Left Up + Left Stop (hold down for 2s)

Upper Limit:  Left Up + Left Stop (hold down for 5s)  

>

  Up or Down  

>

  Left Up + Left Stop (hold down for 2s)

Acceleration:  P2  

>

  Left Up  

>

  Left Up

Lower Limit:  Down (hold down for 2s)  

>

  Left Down + Left Stop (hold down for 2s)

Lower Limit:  Left Down + Left Stop (hold down for 5s)  

>

  Up or Down  

>

  Left Down + Left Stop (hold down for 2s)

Deceleration:  P2  

>

  Left Down  

>

 Left Down

External battery pack is depleted

P1 (hold down for 2s)  

>

   Left Stop (hold down for 2s)

 

Summary of Contents for AMP TDBU REMOTE















Reviews: