www.amp-research.com
9/11
IM77132 rev 08.07.19
A M P R E S E A R C H P O W E R S T E P
T M
– J e e p W r a n g l e r J L
Remove sill plate cover. Remove grommet under floor and route trigger wires and power wire thru grommet.
Mount door trigger module to wire harness in
kick panel area. Using a 10mm socket remove
ground lug and connect ground to body.
Using supplied butt connectors connect red
wire on harness to red wire (Pin1)on module.
Next connect Purple with black stripe wire on
harness to purple with black stripe from module
(pin 6). Lastly connect Purple from harness to
purple on module (Pin 7). See next step for
trigger wire assembly.
Description
Wire
Color
Wire
Color
Description
Positive Supply
Red
1
6
PRP/BLK Driver Side Output
Ground
BLK
2
7
PRP
Passenger Side Output
Driver Front Input
PRP
3
8
WHT
Passenger Front Input
Driver Rear Input
GRY
4
9
YEL
Passenger Rear Input
Not Used
-
5 10
-
Not Used
Pin
locations
1
5
13
12
Summary of Contents for PowerStep 77132-01A
Page 12: ......
