6/10
www.amp-research.com
A M P R E S E A R C H P O W E R S T E P – F O R D F 1 5 0 S U P E R C R E W
IM2996 rev 11.27.06
Insert controller through loose zip ties, align zip
ties into grooves in controller and tighten. Plug
in harness making sure tabs engage completely
on controller.
Line up T-nuts of step extrusion and insert 1/4-20
bolts. You may need to use the end of the Allen
wrench to align the holes with the T-nut.
1
16
The rearward edge of the board should be
about 9.5in from rear mount. Tighten 1/4-20
bolts to 10 ft-lbs.
9.5”
Tighten all bolts of steps 3-6 to 16 ft-lbs.
Repeat steps 1-9 for the passenger side.
Mounting Controller: Under the hood in front
of the wiper fl uid reservoir loop the two 11” zip
ties through the holes on radiator support sheet
metal. Start zip ties, leaving enough to insert
controller.
19
19
5
7
8
9
10
11
12
