APW77BAM (Wi-Fi Access Point) User Manual
Version 1.0.1
Page
：
38
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
10. TX Rate:
For WiFi transmit rate, you can choose
“Best” for auto-adjustment
according to WiFi signal quality in your environment, or you can fix it in certain TX
rate. Please note the WiFi connection may be dropped if you fix at a higher date
rate but in a noisy (poor RF signal quality) environment.
II
、
Advanced RF Module2 Settings
1. Beacon interval
: Beacons are packets sent by a wireless router to synchronize
wireless devices.
2. Transmit Power
: Normally the wireless transmission power operates at 100% out
power specification of this device. You can lower down the power ratio to prevent
transmissions from reaching beyond your corporate/home office or designated
wireless area.
3. RTS Threshold:
If an excessive number of wireless packet collision occurred, the
wireless performance will be affected. It can be improved by adjusting the
RTS/CTS (Request to Send/Clear to Send) threshold value.
4. Fragmentation
: Wireless frames can be divided into smaller units (fragments) to
improve performance in the presence of RF interference and at the limits of RF
coverage.