APW77BAM (Wi-Fi Access Point) User Manual
Version 1.0.1
Page
：
10
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
1.2.5 Button Definition
There are two push buttons in this device. One is the
“Reset” button, and the other is the
“WEC” (Wireless Easy Connection) button. The operation for each button’s behavior is
defined below:
Function
Button
Description
Reset to Default
Reset
(Long Press)
1. Press the Reset button for 6 seconds and then
release it.
2. The Status LED becomes fast flash to indicate
that the reset to default function is triggered.
3. Then, the device will reboot automatically and
apply the factory default settings as well.
It takes about 70 ~ 80 seconds to finish the reset
to factory default operation.
AP Mode Toggling
WEC
(Long Press)
There are two alternative AP modes defined for
the device to operate with WEC (Wireless Easy
Connection) feature. One is Master Mode (by
default), and the other is Slave Mode.
To change the AP mode from one to the other,
you have to:
1. Press the WEC button for about 9 ~ 10
seconds, and then release it.
2. The WiFi LED becomes OFF in 3 ~ 5 seconds,
3. After about 20 ~ 25 seconds, the color of WiFi
LED will be changed consequently.
Green (Master) -> OFF -> Amber (Slave), or
Amber (Slave) -> OFF -> Green (Master).
It takes about 36 seconds to change (toggle) the
AP Mode completely.
Easy Configuration
(Master to Slave)
WEC
(Short Press)
Please manually configure the Wireless Setting
for the Master AP through web UI first, and also
prepare a Slave AP that already been set to Slave
Mode.
1. Press the WEC button of the Master AP for
about 1 second, and then release it, the WiFi
LED becomes fast flash (Green).