KS-111E
47/52
ks-111e_g_en_100
Hardware way of Restoring the factory setting
When happens that even by using the ACM the camera can not be found in
network and you are 100 % sure that camera is properly connected into net-
work, then the hardware reset into factory setting is recommended.
Resetting of all parameters including IP address:
1. Disconnect the camera network cable
2. Dismount the camera cover
To remove the camera cover, two bolts which holds the cover must be released.
Fig. 52 - The bolts which holds the camera cover
Then, use a special plastic tool or flat screwdriver for lifting up and releasing the
camera cover. An appropriate power needs to be applied due to some resis-
tance.
Fig. 53 - Taking off the camera cover.
Summary of Contents for AIPM1010/A
