Amish Country Gazebos Wood Gazebo-in-a-Box, Assembly Instructions Manual, Page: 25 / 28

1. Center the back of each bench support against your
gazebo post and rest the bottom of the support firmly
into your gazebo floor.
Then, with two
2½” screws , attach the vertical back
portion of the support to the gazebo post (1 screw on
upper left and 1 screw on lower right).
3. Take a bench end cap and attach it to the ends of
these two seat boards with
2½” screws
.
Wood bench end cap is 12".
4. Now take the remainder of your seat boards and
center them in position over the bench support boards.
16
Step 16. Installing the benches
(optional)
21
5. Confirm that the seat boards remain in their proper
position, then attach each seat board to the bench
support board by driving screws up through the bench
support board and into the bottom of each seat. Use
2½” screws.
2. Place a long seat board and a short seat board onto
two bench support boards.
The front of the front seat will cover and conceal the top
of the bench support board and extend in past a little
bit. Just move it in towards the center of the gazebo until
they reach from center of support to center of support.
Note: Keep corners of the bench seat boards
approx. 2” from posts.
Note: If you have the optional screen package,
simply attach it to the screen retainers.