Key
Description
1
Timeout:
Determines the length of time (in seconds) between losing communication and applying Fail Safe values onto
the output of the Air Unit.
2
S.BUS Rate:
Specifies the data rate of the S.BUS link between the Ground Unit and the Air Unit that controls the Air
Unit’s camera gimbal. By default, the data rate of the S.BUS remote control is 6.3mSec (FASSTest 12CH).
3
Channel Settings:
Determines the position of the gimbal following a loss of communication. Each channel can be set to:
•
Hold:
The most recent value (prior to the communication loss) is maintained.
•
Set:
A new value is used. Values are configured in % (from -100 to +100).
Connex LR Manual
54
Summary of Contents for Connex LR
