WHDI Reference Design Setup Guide
Dev Kit-UG1_Rev 1.0.28
AMIMON
B1
B2
B3
L1
L1
L1
L1
L2
L2
L3
L4
L5
L6
L7
L8
L9
L10
Figure 6 - LEDs for System Error Indication
5.11 DVI mode (Rx Only)
In case the display has only a DVI port and the Rx is connected to a display via an
HDMI to DVI cable, you should set the Rx in DVI mode which removes the audio
from the link. This mode can also be used to mute an HDMI link.
o
Button
: A short press on B3 sets the Rx in DVI mode (default mode is HDMI). An
additional press returns the Rx to HDMI mode.
Confidential
Under NDA
Internal document. Information subject to change
16
Page
