8
USER’S MANUAL
AMIKO IMPULSE T2C
AMIKO T60
AMIKO T70
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
Card Slot
: One CA Interface for Conax. Under the receiver.
USB
: USB 2.0 Host, connect to USB hard disk, or flash disk (on the right side of the receiver).
Display
: (LED type) Indicates operating status of receiver.
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
USB
: USB 2.0 Host, connect to USB hard disk, or flash disk (on the right side of the receiver).
Display
: (LED type) Indicates operating status of receiver
Buttons
: (Standby, CH-, CH+, V-, V+) to operator the receiver.
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
USB
: USB 2.0 Host, connect to USB hard disk, or flash disk (on the right side of the receiver).
Display
: (LED type) Indicates operating status of receiver
Buttons
: (Standby, CH-, CH+) to operator the receiver.