USER’S MANUAL
AMIKO MINI HD265
AMIKO MINI COMBO EXTRA
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
Card Slot
: One CA Interface for Conax.
USB (on the side)
: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
Display
: (LED type) Indicates operating status of receiver.
RS 232 (on the side)
: This is used to connect your receiver to a computer through a serial cable.
IR IN( on the side)
: Connect an External IR-Sensor (Infrared).
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
Card
Slot
: One CA Interface for Conax.
Common Interface
: One socket for Conditional Access Modules CAM.
USB A
: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
Display
: (LED type) Indicates operating status of receiver.
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
Card Slot
: One CA Interface for Conax.
USB (On the side)
: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
Display
: (LED type) Indicates operating status of receiver.
AMIKO MIRA WIFI
Remote Sensor
: Detects infrared signal from remote control unit.
POWER Indicator
: Lit whilst the receiver is powered on and at standby mode.
Signal Indicator
: When received signal is strong, the signal indicator is lit.
Card Slot
: One CA Interface for Conax.
USB (On the side)
: USB 2.0 Host, connect to USB hard disk, or flash disk,and 3G dongles.
Display
: (LED type) Indicates operating status of receiver.
7
