Amico Hummingbird Lite, Installation Instructions Manual

Page: 21 / 24

www.amico.com 21
Specifications and Adjustments
Refer to Amico website for the manual and specification documents.
Troubleshooting Guide
Problem Possible Cause Solution
LCD/Display mount facing wrong
direction
Incorrect installation Check the LCD/Display Post hole positions,
should keep the LCD/Display mounting
facing front with 180° hole pattern
Loosened worktop Improper installation or loose
connection
Check the screws between worktop and
column plate, should be tightly secured
Sliding Keyboard Tray falls off Forgot to install the stopper Make sure always stopper is installed
Laptop adjustable clamp is not opening Missing key Locate the key or contact Amico
Too easy or too difficult to utilize the
portrait landscape feature
Damaged hardware Please contact Amico Accessories
The LCD/Display mount is not secure,
it is wobbling or loose when using the
portrait landscape feature
Damaged LCD/Display mount LCD/Display mount needs to be replaced.
Please contact Amico Accessories
LCD/Display drifts down Incorrect gas spring in LCD/Display Post Please contact Amico Accessories
Maintenance
Area Maintenance
Period
(Month)
VESA 75/100 Adapter
(FIT Units only)
Check if the VESA Plate and LCD/Display are securely attached. Ensure the four screws on
the Mounting Plate(s) are fastened to the tightest possible position.
3
Visually inspect for any signs of grinding and gapping. 1
LCD/Display Post Inspect bolt, washers and contacting surfaces for grinding and wearing. Ensure bolt is
tightened (using 5/32" ball end hex key) Located bottom center of the post.
1
Casters Inspect Casters for debris, chipping and ensure that all Casters are making contact with
the floor.
1
Ensure the Locking Mechanisms on Directionally Locking and Total Locking Casters are
functioning correctly (test by pressing down with foot and attempting to move the cart).
3
Manual Height
Adjustable Column
Check if the height adjustment is smooth. 3
Handle Ensure that the Handle screws are tight, if loose then tighten using #3 Philips screw
driver (Screws are underneath the worktop).
3
General Clean any dust build-up on the cart and vacuum the dust out around the wheels. 1
It is recommended that all locks, bolts and screws are visually inspected for signs of
product wear and tear or damage. Check the product for looseness in the mount.
3
Troubleshooting, Maintenance, Product Classification