www.amico.com
25
Head Siderail Replacement
WARNING:
Replacement of Siderail MUST be completed per the instructions below and only using Amico
approved parts. Failure to comply may result in significantly-reduced effectiveness of the safety features of the
system.
Step
No.
Procedure
Illustrations
1
Locate Head Siderail that requires replacement.
Make sure that replacement Head Siderail
corresponds to the correct side of the bed.
2
Disconnect the signal cable from the main
harness. To disconnect the cable, remove the
locking nut first.
3
Locate the bolts holding the Head Siderail to
the Fowler frame. Using a 1/2" (13 mm) wrench/
socket, remove the bolts and pull the Head
Siderail away from the Fowler.
4
To install the new Head Siderail, perform the
above steps in reverse. With the new Head
Siderail plugged in, check that the buttons are
working properly.
Summary of Contents for Apollo MS-SC
Page 1: ...Operation Maintenance Manual Apollo MS SC...
Page 46: ...46 Amico Beds Corporation Notas...
Page 47: ...www amico com 47 Notas...
