37
Install PPCG4.0ZpZt hob in a worktop (Fig.)
INSTALLATION
●
prepare opening in the worktop with dimensions shown on the assembly drawing,
●
for perfect fit, the hob should be sunk in flush with the worktop surface,
● connect the hob to a gas and electrical system in accordance with the instructions supplied,
●
the gap between the hob and the worktop should be filled in with silicone glue,
●
do not operate the appliance until the glue has hardened.
Remove
PPCG4.0ZpZt
hob
●
disconnect the appliance from power,
●
using a suitable tool cut the silicone sealing rim around the hob,
●
push the hob gently upward from below to remove from opening.
min.600
min.30
486
+2
505
+1
585
+1
560
50
=
=
max.R5
R5
6,5
+0,5
576
518
48
8,5
580
560
522
12
490
►
►
Fig.
130