18
OPERATION
Control panel
● Once you connected the hob to the power network, all indicators will light up at the same
time. The hob is ready for work.
● The hob is equipped with electronic sensors which you switch on by pressing them with
the finger for at least 1 second.
● Each of the sensor settings is signalled with a sound signal.
Do not put any objects on the sensors (this may trigger the defect identification signal).
Their surfaces should be clean at all times.
Switching a heating zone on
Once you switched on the hob, using
the switch on/off (1) sensor select the
heating power level for a given heating
zone using sensor (+) (2) or (-) (3. ¬If
you start heating power adjustments with
sensor (+) (2), heating power (4) will first
appear on the display. If, however, you
start heating power adjustment with sen-
sor (-)(3), heating power (9) will appear
on the display.
Switching the hob on
If the hob is switched off, all heating zones are
turned off and the indicators are off.
The hob is switched on by touching the main
sensor (1)¬. On all indicators of heating zones
(4) „0” appears for 10 seconds. Now you can
adjust heating power using sensor (+)(2) and
sensor (-)(3) for a given heating zone.
(see Heating power level adjustment).
If within 10 seconds no sensor has
been activated, the hob switches
off.
If the lock is activated, the LED by
the key sensor (10) lights up and
you cannot switch on the hob (see
Unlocking the hob).
4
1
2
3
4
4
10
11
1
2
3
2
3
Summary of Contents for PB 5VI502FTB5 Series
