12
OPERATION AND FUNCTIONS
Control panel
Electronic Control System
The freezer is provided with electronic control
system. The control system is positioned
behind the door. The appliance is factory set
to ensure operation in optimal temperature,
i.e. -18°C.
If the user intends to change the factory
settings, new settings will be stored in the
memory of the electronic controller. In case of
power failure, the controller remembers the
last settings, which will be recalled once the
appliance is switched on.
Functions of the electronic controller
l
(1) – Freezer ON/OFF function, operation
signaled with a green control light
l
(2) – Displays the set freezer temperature
l
(3) – Temperature display, freezer alarm
codes display
l
(4) – Super Freeze function, activation
signaled with a blue control light
l
(5) – “Eco” function, activation signaled with
a green control light
l
(6) – Change of the freezer temperature
setting – temperature decrease
l
(7) – Change of the freezer temperature
setting – temperature increase
Switching the appliance ON and OFF
To switch the freezer ON: push and hold pu-
shbutton (1). Switching ON is signaled with
a green light in pushbutton (1). Additionally
the current temperature is displayed on the
display (3) – freezer temperature.
To switch the freezer OFF: push and hold
pushbutton (1), ‘- - ‘symbols will be displayed
on the display.
Temperature control
Temperatures in the freezer compartment
can be set within a range from -25°C to
-16°C. The current temperature setting is di
-
splayed by pressing and holding pushbutton
(2). Pressing pushbuttons (6) or (7) allows to
change the freezer temperature setting.
Every time a pushbutton is pressed there is a
short sound emitted.
In case of power failure, the controller
remembers the last settings, that will be
recalled once power is restored.
Temperature inside the freezer
The set and displayed temperatures are the
average temperatures of the freezer. The
temperature setting in the freezer should
not be changed only because it is warmer
in summer. Increased ambient temperatu-
res will be detected by the sensors and the
compressor will operate longer to maintain
the set temperatures.
1
2
3
4
5
6
7