![background image](http://html1.mh-extra.com/html/amica/ebsx-949-600-e/ebsx-949-600-e_instruction-manual_2932721025.webp)
25
OPERATION
Drain the water from the system when you
hear a beep and the “Remove water” mes-
sage is flashing.
•
Open the oven door.
•
Then place deep baking tray under the
water drain.
•
Press OK to drain the remaining water
from the steam system. Pour the solu-
tion out of the baking tray and rinse it
with water.
IMPORTANT: If water is dripping from the
drain tube during the steam programme, flush
the system. When the appliance is on but no
function is active:
•
Place at least 1 litre container under the
drain.
•
Pour 0.5 litres of water into the water
container drawer.
•
Simultaneously touch the
sensors
and drain water out of the system.
•
Repeat this procedure twice.
If the problem persists, descale the appliance.
IMPORTANT: If you notice scale draining
from the steam system after the completed
steam programme, select the “Descale” pro-
gramme from the list and follow the descaling
instructions.
If you pour water into the container but de-
cide not to run a steam programme, you can
touch the
sensors to drain water from
the steam system.
Special functions
Child Lock
To activate the child lock simultaneously
touch and hold the and for about 3 sec-
onds. When the Child Lock function is set, the
symbol and the message “
Simultaneously
touch
and
to release” The message will
be displayed for 3 seconds. When Child Lock
is active the message is displayed each time
any sensor is touched.
When child lock is enabled, you will not be
able to make any changes to the cooking
programmes. All the sensors, except ,
and are inactive. When child lock is ena-
bled touch and together to deactivate
the child lock or sensor to acknowledge
a completed programme. When child lock is
enabled the sensor serves only to interrupt
the programme rather than access the menu.
Simultaneously touch and for approxi-
mately 3 seconds to deactivate the child lock.
When the Child Lock function is released the
symbol and the message “
Simultaneously
touch
and
to release” will be off.
Note.
Child Lock continues to be active even
after a power outage.
Automatic power cut out
If the oven operates any heating function for
a long (excessive) period of time, heating
elements are disconnected.
Example: If oven cavity temperature is 200°C
heating elements are turned off after about
3 hours. At a temperature of 100 °C after
about 10 hours.
This prevents overheating.
If all the heating elements are disconnected,
this is indicated by a flashing display backlight