19
OPERATION
Note:
The two icons of “
” and “
” on the control panel will extinguish if no any operation within 1
minute after plug in. To reactivate, rotate the control knob or press the “Start/Stop” button on the
control knob, then the “
” and “
” will illuminate again.
MAKE DRIP COFFEE WITH COFFEE POWDER DIRECTLY
l
Open the water tank cover, pour clean cold water into water tank as needed.
Note:
Please ensure the cup size is the same as the water amount filled in water tank,
when brewing, the unit will finish boiling all of the water in water tank.
l
The coffee you get would less than the water you pour in as some water had been absorbed
with coffee powder.
l
Never pour hot water, milk, coffee powder or tea into water tank.
l
Please don’t fill the water tank exceed the mark of 6 indicated on water gauge.
l
Rotate the funnel support to the left, ensure the filter is inside of the Funnel Support. Add
desired coffee powder into the filter according to your experience, then turn the Funnel
Support to the right until it is locked.
l
Plug in the power cord into the outlet. The “
” and “
” icons on the control panel are
illuminated.
l
Turn the control knob to the right to select the coffeedispensing amount basing on your
demand. There are “
” (6 cups), “
”(4 cups ) and “
” (2 cups) for selection.
And the appliance will work under the default coffeedispensing amount that is 6 cups if you
do not select your required number of cup after plug in.
Note:
l
Turn the control knob to the left to “
”, press down “Start/Stop” button and the indicator
in the middle of control knob blinks, and then the appliance starts brewing.
l
After brewing, the buzzer will sound 3 times.
l
When finish brewing, if you do not unplug the power cord from the power outlet, the coffee
can be warmed in the carafe for some time, after some time, the appliance will cut off power
automatically. The whole process of warming lasts for 35 minutes.
Summary of Contents for CD 4011
Page 23: ...23 ...