18
It is recommended to use powder or liquid general purpose
detergents for all temperatures in a range as per the deter-
gent Producer’s recommendations indicated on the product
packaging.
Detergents
l
Pour the detergent into the drawer compartment marked
l
Pour the pre-wash detergent into the drawer compartment
marked
Liquid detergents
l
Install the supplied partition in the compartment (figure
below).
l
Pour liquid detergent into the drawer compartment marked
Fabric softeners added to the rinse
l
Pour the fabric softener into the drawer compartment marked
l
Do not exceed the maximum level marked on the drawer com-
partment. This detergent will be used for the final rinse.
Before washing for the first time, put it through one high tempera
-
ture cycle without a load, according to the following procedure:
l
Connect the washing machine to the electricity mains
l
Turn on the water valve
l
Set the programme selector knob to high temperature wash.
l
Add the appropriate detergent and press the [Start/ Pause]
button.
I. Cleaning and
purifying agents
II. First wash
Reducing energy and water consumption
Garments which are only lightly soiled should be washed using the
appropriate wash programme, i.e.
ULTRA SHORT
The washing
machine detects partial load. For partial load, when using the To-
wels and Cotton programmes, washing machine will reduce water
and energy consumption and shorten the wash cycle.
IV. Conservation
Stubborn stains
Before washing garments, apply an additional stain remover ac-
cording to the instructions for use
Heavily soiled:
l
One-off washing of smaller amounts of clothes
l
Add more detergent
l
After washing heavily soiled clothes (e.g. working clothes) or
garments which are shedding fibres, it is recommended that the
washing machine is rinsed out by running a programme cycle
at a temperature of 60°C, e.g. COTTON, without a load. Lightly
soiled:
l
See pt. „Conservation”.
III. Soil
PRACTICAL ADVICE REGARDING WASHING
