background image

10

2.   

Display

Time, temperature, spin speed, delay start 1-23 h are available on display. 

      In addition, additional function indicators are displayed (delay start and 

      rapid wash), and  START/PAUSE. Message End is displayed at the end of 

      programme.

l

    The remaining time is displayed during wash cycle. The displayed time is an 

       estimate and may differ from actual wash cycle time, depending on temperature, 

       water pressure, load size, quantity of washing powder used etc. The time is 

       automatically updated during wash cycle. Displaying the same time for an 

       extended period or abrupt changes are normal.

Child Lock

      When Child Lock is active if you attempt to change the wash cycle or settings 

      the 

CL

 symbol will flash on the display.

3.   Temperature selector 

button

 

This button allows the washing temperature to be set. Press this button to display water 

temperature settings available for a given programme or an option for washing in cold 

water (no heating). Depending on the programme selected, the display shows the follo-

wing temperatures - - °C (cold water) -     - 30°C - 40°C - 50°C - 60°C -70°C - 80°C - 90°C. 

For the Eco programme you can select the cold water  option or 20°C on the display.

4.   Spin speed 

button

Press this button to set the spin speed when water is being pumped out of the washing 

machine. Press the button to change the setting. Depending on the programme selec-

ted, the display shows the following options - - (spin off)      - 400 - 600 - 800 – 1000 

- 1200 - 1400.

5.   Delay Start 

button

Press this button to set the delay time for starting washing. The setting range available is 

from 1-23 hours. Press the button to set the time after which washing is to commence.

NOTE: 

If there is a power outage during Delay Time, countdown will resume 

            immediately after the power is restored.

DESCRIPTION OF CONTROL PANEL

1.

   

Programme selector knob

Choose the appropriate wash programme as required, depending on the degree of soil, 

and type and amount of laundry loaded, which ensures better results and more effective 

washing. Once the wash programme is started, turning the programme selector knob to 

another position (except       ) does not change the previously selected programme.

Summary of Contents for AWI614S

























Reviews: