22
| Instruction Manual
4. Gently lower the door away
from the top hinge and place
on a padded surface to avoid
the risk of damage as shown in
fig. 10.
5. Remove the upper hinge (9) as
shown in fig. 12.
6. Unscrew and transfer pin (7) from the lower hinge plate to the
opposite side as shown in fig. 9.
7. Pop out the cover caps on the opposite side and use them to
cover the screw holes on the original side.
8. Fit the alternative upper hinge on the opposite side.
9. Rotate the door 180º and relocate it on the top hinge.
10. Refit the modified lower hinge into the door and secure it to the
appliance body using the screws removed in step 1.
11. Refit all ventilation trims.
IMPORTANT:
Allow the wine cooler to settle for 24 hours before switching it
on.
Keep the spare hinge plate(s) to be able to reverse the door back
again.
Door reversal diagram index
fig. 12
1 - Ventilation trim adjustment screws
2 - Front ventilation trim
3 - Rear ventilation trim
4 - Front ventilation trim securing screw
5 - Lower hinge
6 - Lower hinge fixing screw
7 - Main hinge pin
8 - Hinge bracket
9 - Upper hinge
10 - Upper hinge
fixing screw
11 - Replacement top
hinge