Instruction Manual |
23
Adjusting the plinth
The pre-fitted plinth for this appliance comes with an adjustable
lower section that is initially seated behind the upper section. The
process for adjusting the plinth trim is simple and is achieved by
following the image and steps below.
fig. 13
1. Remove the screws (1) from both the top left and top right hand
sides
2. Loosen or remove the screws (2) from the bottom left and bottom
right hand sides.
Failure to sufficiently loosen the bottom
screws may cause damage to the lower trim when adjusting it
3. Carefully guide the lower trim down until the desired height is
achieved
4. Reinsert the screws (1) and tighten them, then tighten or reinsert
screws (2)
