OPERATION
21
Heating functions
Turn the
function selector knob
to set the
heating function. Depending on the model,
the function selector knob features 8 or 10
heating functions and an OFF (
0
setting).
Function selector knob
positions
POSITION 0.
You cannot use the and functions.
They will not respond and an [error] beep
is emitted.
Clock
functions are limited. When you
turn off the oven by setting the
function
selector knob
to
0
the display will show cur-
rent oven cavity temperature. Temperature is
displayed, if it is higher than 60°C. No oven
functions are displayed.
POSITIONS 1–10.
Please refer to the table on the next page for
details on how the oven operates when you
set the
function selector knob
to individual
heating functions.
Set the heating temperature
Each heating function has an associated
default temperature. To adjust it at any time
in the range 0-280°C touch and use the
set-
ting selection knob
to make the adjustment.
No adjustment is allowed in CLEANING and
DEFROST functions. This will be the new set
temperature. If you touch and do nothing for
5 seconds, you will not be able to adjust the
temperature. You need to touch the sensor
again. The
symbol is shown when the
thermostat turns on any of the heaters.
Open the door during operation.
If you open the oven door, if any of the heat-
ing function is activated except PYROLYTIC
CLEANING (door locked), the fan and heat-
ers will turn off until the door is closed. If the
door is open longer than 30 seconds, you
will hear a 15-second [error] beep. Touch any
control to silence the alarm.
