OPERATION
17
Turn on the oven and set the time.
When you plug in the appliance there is a
[confirmation] beep. Set the current time. The
current time must be set for the appliance
to operate. Touch controls or knobs do not
respond. An [error] beep is emitted. You can
only set the current time
.
The clock shows 24-hour or AM/PM time.
Touch and hold
for 3 seconds to set the
time. You will hear the [confirmation 2] beep
and "24 h" or "12 h" will flash on the display.
Use the
setting selection knob
to change
the time mode. Touch [ ] briefly to confirm.
Hour digits will start to flash. Use the
set-
ting selection knob
to set the hour 00–23
(or 01–12 AM, 01–12 PM depending on time
mode). The hour digits stop flashing. Touch
briefly to confirm. A [confirmation] beep is
emitted. The minutes digits start to flash and
you can now set the minute. Use the
setting
selection knob
to set the minute. Touch
to confirm. An [end] beep is emitted. Digits
are not flashing and the clock shows current
time. The second indication colon is flashing.
If you do nothing for 5 seconds when setting
the time, the [settings entered] beep is emit-
ted. The clock will be set to the last setting
entered by the user. The oven enters the
standby mode. You can use oven functions.
In standby mode, the display intensity set to
low. The following are displayed:
clock,
symbols of the active functions: oven
cavity residual temperature, child lock,
kitchen timer, door lock.
When you use any controls the appliance
enters the operating mode. Display intensity
is set to high.
Important! In the event of a power outage
all set functions, automatic programmes, set
temperatures and timer are cleared. If you
interrupt the pyrolytic cleaning (or the door
is locked for any other reason), the oven will
start the cooling and door opening procedure
before you can set the time.
To turn off the oven — set
function selector
knob
to
0
.
