background image

 

EBS 10K Flat Lid                                                             910101-000595 / 07.2019 

Page 2 of 28 

AMIAD Water Systems 
 
EBS 10K Flat Lid Filter - User Manual  

 
 
  
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Disclaimer: 

 

Copyright © 2017 Amiad Water Systems Ltd. All rights reserved.  
The contents of this document, including without limitation all information and materials, images, illustrations, data, drawings, names and any other 
such materials that appear in this document are the sole property of Amiad Water Systems Ltd., including any intellectual property rights, whether 
registered or not, and all know-how contained or embodied therein. Amiad may alter, remove or change the Content without any further notice. You 
may not reproduce, copy, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of this 
document or its content.  
The confidential nature of and/or privilege in the file enclosed is not waived or lost as a result of a mistake or error in this file. If you received this file in 
error, please notify Amiad immediately at [email protected].  
This document does not replace any certified drawing, procedure or information provided by Amiad in reference to a specific customer, site or project.  
Amiad assumes that all users understand risks involved within this file and/or its attached materials. This document is given in good faith and is not 
intended to impose any obligation to Amiad. While every effort has been made to ensure the information in this manual is accurate and complete, we 
would appreciate if you can bring any errors or omissions to the knowledge of Amiad or consult Amiad experts or its authorized representatives if you 
have any questions.  
 
Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel Tel: 972 4 690 9500 | Fax: 972 4 814 1159 Email: [email protected]

 

Summary of Contents for EBS-10K Flat Lid Filter





























Reviews: