ADI-P
910101-000992 / 0
5.20 0
2
Page 17 of 21
Connection Instructions:
The connecting process has two stages; Stage 1: wires connection. Stage 2: setting the ADI-P App for chained
operation.
Stage 1: Wires Connection
1.
Connect between the Primary
controller’s
NO relay output and the Secondary
controller’s
external DP
input.
Important:
For your safety and in order to avoid damaging the controller, remove the batteries
before starting the wiring process.
2.
Make sure that the wires
’
gauge (the diameter of the cable) used is similar to the solenoid wires
’
gauge
(~4 mm). This is critical for maintaining the IP65 rating of the controller (dust tight and protected against
water projected from a nozzle).