ADI-P
910101-000992 / 0
5.20 0
2
Page 11 of 21
Anti Freeze Active
Freezing Protection start, as a result of Low
Temperature Threshold
Anti Freeze Exit
Stop Freezing Protection procedure
Reports screen:
The upper red line
Displays the name of the currently connected controller and the communication status.
The second line
Displays icons of the different flush types. Select the desired icons to be displayed on the chart.
The chart window
Displays the number of flush cycles according to the selected icons.
Total Flushing Cycles
The total number of flush cycles currently displayed in the chart window.
The lower black line
Enables the user to select the
chart’s
time span (day, week, month).
History screen:
The upper red line
Displays the name of the currently connected controller and the communication status.
The second line
Enables sorting events between two dates and deleting an event.
The black line
Enables filtering events according to the four flush types (DP, Interval, Manual, Preset, Anti Freeze).
The events list
Display the events messages according to their occurring time and date.
The Menu screens:
Enter the menu screens by tapping on the Menu icon in the upper left corner of the SITE LIST screen:
System Units
Select the system engineering units: Metric or US.
Language
Select the application user interface language: English, French, German, Hebrew, Italian,
Portuguese, Russian or Turkish.
Account
Displays the registration details of the system: User name, User e-mail, User country, User company
and User job description.
User Manual
This screen shows the user manual.
Support
Contact Us screen.
App Version
Displays the current version of the ADI-P Application.
Messages
Messages from the Amiad system
The Settings screens:
Enter the setup screens by tapping on the Settings icon in the upper right corner of any of the 5 main screens:
The upper red line
Displays the name of the currently connected controller and the communication status.
Controller State
Displays the current controller state and allows the user to switch the controller ON and OFF
DP Set Point
Displays the DP level for starting a flush cycle and allows the user to enable or disable the DP
operation.
The recommended setting is displayed at the bottom of the screen.
Interval
Allows the user to set the time intervals for flushing and enable or disable the flushing according to
time intervals.
The recommended setting is displayed at the bottom of the screen.
Daily Preset Flush
Allows the user to set specific flushing start times. Start time can be set as daily start times or
single-time start times. The user can set up to 8 start times.
Flush Time
Allows the user to set the duration of the flush operation.
The recommended setting is displayed at the bottom of the screen.
Dwell Time
In case the system operates two filters, this parameter allows the operator to set the time delay
between the flush cycles of the first and second filters.
Battery
Displays the current ch
arge level of the controller’s
batteries.
ID
Enables the user to set the site’s
picture, name and ID parameters such as: filter model, controlle
r’s
serial number and filter serial number.
The second screen allows the user to select the type of the water source, flow-rate, the working
