COPYRIGHT © 2009 AMI ENTERTAINMENT NETWORK, INC.
MEGATOUCH ION EVO OWNER’S MANUAL PM0426-26 Rev A
19
Diagnostics Menu
FIGURE 15 - DIAGNOSTICS MENU
Video Test
Touch the screen to cycle through a series of video test screens.
I/O Test
Tests the SETUP and CALIBRATE buttons, all coin channels, the coin
meter, and the coin lockout feature (if applicable). A green light next to the
appropriate button will register each time that item is tested, and the
number next to the item should increment by one with each test. The
screen also displays which DIP switches are on or off.
Touchscreen
Calibration
Follow the on-screen instructions to calibrate the touchscreen.
Touchscreen Test
Allows you to check the touchscreen calibration accuracy. The crosshairs
should follow your finger exactly when you move it across the screen.
Checksum Test
Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted will be
shown whenever the game encounters an error. With STOP ON
ERROR? set to NO, a list of corrupted files will be displayed when the test
is complete. If errors are detected, the software on the drive may need to
be reloaded. If this does not solve the problem, the drive may require
replacement. The test could take up to 30 minutes.
System Info
Gives details about the following:
•
platform type
•
processor type and speed
•
motherboard type
•
amount of memory
•
Ethernet card manufacturer
•
sound chip type
•
video chip type
•
touchscreen manufacturer
•
hard drive manufacturer/size
•
modem identification number
•
fan speed
•
status
•
PSOC version
•
I/O board processor
Verify Databases
Only use on the advice of Technical Service. An Update from Server
must be performed prior to verifying databases.
Hard Drive Self
Diagnostics
Checks the hard drive for errors, displays results, and notifies the operator
when an error is detected or a hard drive failure is imminent. Tests can
be initiated automatically and/or manually.
Joystick Calibration
(Ion only)
Follow the on-screen instructions to calibrate the joystick.
Joystick Test
(Ion only)
Allows you to check the joystick calibration accuracy. The crosshairs
should follow the movement of the joystick.
View System Log
Displays a log of all operations performed by the game since the log was
last cleared. This information is helpful for customer service in
troubleshooting your game.
