COPYRIGHT © 2009 AMI ENTERTAINMENT NETWORK, INC.
MEGATOUCH ION EVO OWNER’S MANUAL PM0426-26 Rev A
11
Settings
Touching the Settings button allows the
operator to choose whether players can
play Per Game, Per Time, or both when the
game is in Coinless Coin Op mode. Per
Time pricing can be changed on this screen
with the up and down arrows. The
currency amount will apply to each 15-
minute time block selected by the customer.
FIGURE 4 - PLAYER MENU IN COINLESS
COIN-OP (TIME AND PER GAME MODES
BOTH ENABLED)
FIGURE 5 - COINLESS COIN-OP MENU -
SETTINGS SCREEN
Coinless Coin Op Menu
When enabled via the Options button on
the Credits/Pricing Menu, the Coinless Coin
Op feature allows the operator to charge
on a per-game or per-time basis without
players inserting money into the game. The
total amount owed after gameplay is tallied
by the machine and collected by the location
owner. Location owners reset the game
with a PIN after collection.
NOTE: If you have set a tax fee on the
Cash Settlement Screens, Coinless Coin
Op Mode play will be taxed at the set
rate. If you want to set the tax
percentage at a different rate for
Coinless Coin Op mode and regular
mode, you should perform a Cash
Settlement Collection, change the tax
rate and then switch modes.
Certain features will not be available in
Coinless Coin Op Mode, such as MegaNet
content, Merit Money, Promo Credits, Free
Credits, credit card purchases,
TouchTunes® music and AMI jukebox music.
Pricing for these features can only be
displayed in currency values, not credits.
Setting the PIN
Touch the Set PIN button on the Coinless
Coin Op Menu to program the PIN. The
number can be from 1 to 5 digits.
NOTE: The Coinless Coin Op PIN can
also be set from the Player Menu.
Touch the Options button, enter the 6
Star PIN, and touch the CCO Set PIN
button.
Disabling the Money Inputs
It is recommended that the money inputs be
disabled when the game is in Coinless Coin
Op mode. Unplug the power and signal
harness connected to the bill/note acceptor
and the harness connected to the coin
mech (if applicable) to disable the inputs.
