MAN-X5SL-ENG-01
9
(12) through thrust washer (11) and then into the chain wheel
planet gears (9) to be timed with marks aligned as per the below
in place then attach gear cover (13) to the gear side frame plate (8).
Assemble the Chain wheel and chain: Assemble the chain
stop (16) to one end of the chain. Before or after assembly,
lubricate chain with any viscosity gear oil. Apply so that it reaches
contact areas between the links then wipe off excess
(dry lubricant may be substituted).
Lay the gear end assembly on a workbench with pinion
shaft (12) up. Place the load chain (7) around the chain
wheel (5). Insure the chain weld is facing away from
wheel, (see illustration below) and that the chain stop
(16) is on the right hand side and perpendicular to the
frame plates without twist in the chain. Looking at the
gear side frame (8), with hook pin (6) at the 12 o’clock
position, insert the stripper (4) at the 7 o’clock position,
and guides (3) at 4 and 10 o’clock positions. Place the
top hook assembly (70) over the protruding pin (6).
Position brake side frame plate assembly (1) over the
parts while aligning; bosses on the stripper and guides,
hook pin (6) and spacer bolts to the mating holes.
Note: X5 hoists are designed to allow the chain weld to be
assembled in any orientation. However, ASME Standard
4.3.1 (f) implies the chain is to be assembled per this instruction.
9
10
12
9
ⓒ
2016 All Material Handling
(12) through thrust washer (11) and then into the chain wheel (5). Insert top hook pin (6). Insert the
per the below illustration. Be sure hook pin (6) is
to the gear side frame plate (8).
Assemble the chain pull
Before or after assembly,
so that it reaches
contact areas between the links then wipe off excess
pinion
) around the chain
away from
that the chain stop
on the right hand side and perpendicular to the
Looking at the
o’clock
o’clock position,
’clock positions. Place the
pin (6).
Position brake side frame plate assembly (1) over the
parts while aligning; bosses on the stripper and guides,
weld to be
Standard B30.21-
nstruction.
16
5
12
8
3
6
4
70
7
3
80
9
