MAN-X5SL-ENG-01
5
ⓒ
2016 All Material Handling
PERIODIC INSPECTION is required annually as a minimum and must be recorded. Periodic
Inspection may be required more often as determined by severity of service or as experience dictates.
Consult ASME B30.21 for determination of service and instruction. Periodic inspection is also required for
repaired units. This inspection requires disassembly and load test prior to being returned to service.
See sample PERIODIC INSPECTION form in back of this manual
Inspect for a), through j) items listed in Preoperation and Frequent Inspection plus the following:
k)
Disassemble lever end of hoist to expose the brake components. Inspect brake pawls, disc,
springs and ratchet surfaces for contamination or abnormal wear.
l)
Inspect; chain, springs and load bearing parts per section 5.0 INSPECTON
MEASUREMENTS as illustrated in this Manual.
m) Disassemble hook blocks and check hooks 100% for any sign of cracks, bending, twist or
stretching and opening measurement per section 5.0 INSPECTON MEASUREMENTS as
illustrated in this Manual.
n)
Check chain wheel or wheels for smooth operation and visually for wear.
o)
Check chain guide and guards for damage.
p)
Load test to Min. of 125% WLL (Max. 150%). During which confirm function is as intended.
After the test load is released inspect again for requirements of a) through g).
5.0 INSPECTON MEASUREMENTS:
A
Max.
Hooks
1
⅛
US Ton
(1t metric)
1.85 in (47mm)
1¾ US Ton
(1.6t metric)
2.24 in (57mm)
3½ US Ton
(3.2t metric)
2.72 in (69mm)
7 US Ton
(6.3t metric)
3.19 in (81mm)
10 US Ton
(9t metric)
4.06 in (103mm)
Chain
Max.
1
⅛
US Ton
C5.6H17Z G100
3.45 in (87.6mm)
1¾ US Ton
C7.1H20Z G100
4.09 in (104mm)
3½, 7 & 10 US Ton
C10H28Z G100
5.71 in (145mm)
7
71
