background image

Rev1 0420 P/N 911-016662 

11

Temperature readings are too close 
together, and the thermometer did not 
have time to reboot.

 

Pause for 3-5 seconds minimum between 
readings; a 15 seconds pause is recommended.

 

The measuring distance is too far.

 

Take measurements at the recommended 
distance (app. 3-5 cm ; 1.2in-2in ). 

 

XVI. 

EMC Declaration

 

 
The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare and clinic environments. 

Warning

Don’t near active HF surgical equipment and the RF shielded room of an ME system for 

magnetic resonance imaging, where the intensity of EM disturbances is high. 

Warning

  Use of this equipment adjacent to or stacked with other equipment should be avoided 

because it could result in improper operation. If such use is necessary, this equipment and the other 
equipment should be observed to verify that they are operating normally. 

Warning:

 Use of accessories, transducers and cables other than those specified or provided by the 

manufacturer of this equipment could result in increased electromagnetic emissions or decreased 
electromagnetic immunity of this equipment and result in improper operation.” 

Warning

Portable RF communications equipment (including peripherals such as antenna cables   

and external antennas) should be used no closer than 30 cm (12 inches) to any part of the equipment 
016-662, including      cables      specified      by      the      manufacturer.      Otherwise, degradation of 
the performance of this equipment could result. 

1

 All necessary instructions for maintaining BASIC SAFETY and ESSENTIAL PERFORMANCE with 

regard to electromagnetic disturbances for the excepted service life. 

Portable and mobile RF communication equipment may affect the performance of the 016-662, 
avoiding strong electromagnetic interference when used, such as near mobile phones,   
microwave ovens, etc. 

2

 Guidance and manufacturer’s declaration -electromagnetic emissions and Immunity 

 

Guidance and manufacturer’s declaration -electromagnetic emissions and Immunity

 

Table 1 

Guidance and manufacturer’s declaration - electromagnetic emissions 

Emissions test 

Compliance 

RF emissions 

CISPR 11 

Group 1 

RF emissions 

Class B 

Summary of Contents for FeverScan 016-662















Reviews: