10
RideMaxx Quick Start Guide
11
Softail FuelMaxx Installation
FuelMaxx on Softails
The ECU Plug-in Module Installation for Softails
1.
Remove your seat by unscrewing the securing bolt.
—Consult your bike’s manual for your specific seat removal instruction.
Prior to installation, please ensure that the ignition of your bike is turned off.
2.
Using a 3/16˝ Allen Wrench, unbolt
all four ECU bolts and remove the ECU
while still attached to the ECU connector.
—Consult your bike’s manual for your specific
ECU removal instruction.
Softail install continued on page 14…
Ensure the ECU tray is located
at the maximum height on the
fender. This allows for needed clearance of
the FuelMaxx module. To do this, loosen the
bolts with a 3/8˝ wrench and slide the tray
up the fender. Retighten the bolts once in
position.
