RideTuner Installation
20
RideMaxx Quick Start Guide
21
6.
With the included RideMaxx 3/32˝ hex driver replace both bolts.
• For 1 inch handlebars replace the included
semi-circle reducer gaskets. They are slightly
oversized for a proper compression fit.
• Where any cabling on your handlebar is
an obstruction, it may be necessary to trim a
small section of your reducer gasket to allow
the cable to pass through your RideTuner.
5.
Adjacent to the switch housing, attach
the RideTuner around the handlebar for
a loose hold. Position the button faces for
your desired orientation.
Ensure a tight fit is acheieved with tight pressure on the gaskets.
Warning—Do not overtighten. Stripping inserts voids warranty.
