AMF S 4000 LS, Parts And Service Manual, Page: 50 / 76

S-4000 TKF, LS Omron
1-44
Released 12/2009
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
E - MACHINE ADJUSTMENTS
1 7 . T H E H O L D D OW N A D J U S T M E N T
(S4000 LS modification only)
1. It is necessary to adjust the hold down
Ì
by
loosening the screw
Ê
, if:
a) the hold down is not in the centre of
the clamp foot groove
b) the needle puncture
Í
is not in the
hold down groove or if the distance
X
between the needle puncture and the
hold down groove is not the same on
both sides - see picture
A
2. If a clearance exists between the hold down
and clamp foot, loosen the screw
Ë
and
move the hold down downwards. There
must not be any clearance between the hold
down and clamp foot.
N o t e : It is necessary to check the
adjustment mentioned in point 1 after this
adjustment.
Ê
Ë
Picture
A
Í
Ì
www.promelectroavtomat.ru