BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AMC60
53
The screen displays the real-time discharge status. Press the START/ENTER
button to change the discharge value. Press the START/ENTER button again to
save the set parameter value. Press the BATT TYPE/STOP button to exit the
program.
NIMH/NICD BATTERY PROGRAM
This programme is intended for charging and discharging NiMH/NiCd batteries in connection with RC models.
CHARGING NIMH/NICD BATTERY
You can press the Inc. or Dec. button to change the parameter value and press
the START/ENTER button to save the value.
The screen displays the real-time charging status. Press the BATT TYPE/STOP
button to end the process. The end of the process is indicated by an acoustic
signal.
CHARGING NIMH/NICD BATTERY IN THE AUTO MODE
In this program, the charger detects the condition of the battery connected to the output and charges the battery
automatically. In this mode, you should set the upper limit of the charging current to avoid damage due to excessive
supply current. Some batteries with low resistance and low capacity may result in a higher current in automatic
charging mode.
