Troubleshooting
29
5.10 Equipment Return
In order to provide the best service, any equipment being
returned for repair or credit must be pre-approved by the
factory.
In many applications, sensing elements are exposed to
hazardous materials.
•
OSHA mandates
that our employees be informed and
protected from hazardous chemicals.
•
Material Safety Data Sheets (MSDS)
listing the
hazardous materials to which the sensing element has
been exposed MUST accompany any repair.
• It is your responsibility to fully disclose all chemicals
and
decontaminate
the sensing element.
To obtain a return authorization
(RA#), contact the
Service department at + 215-674-1234.
• Please provide the following information:
• Model Number of Return Equipment
• Serial Number
• Original Purchase Order Number
• Process Materials to which the equipment has been
exposed.
• MSDS sheets for any hazardous materials
• Billing Address
• Shipping Address
• Purchase Order Number for Repairs
• Please include a purchase order even if the repair is
under warranty. If repair is covered under warranty,
you will not be charged.
Ship equipment freight prepaid to:
AMETEK-DREXELBROOK.
205 KEITH VALLEY ROAD
HORSHAM, PA 19044-1499
COD shipments will not be accepted.
Summary of Contents for Z-tron IV
