Ametek Z-tron IV, Installation And Operating Instructions Manual

Page: 18 / 42

12
Z-tron IV
TM
Point Level Control
Figure 2-6
Wiring the Remote Sensing Element
2.8 Wiring the Sensing Element (Remote)
If the Ztron electronic unit is mounted remotely from the
sensing element, the cable connections from the sensing
element to the electronic unit are made to the individual
terminals on the side opposite the terminal strips.
See Figure 2.6 / 2.7.
NOTE
It is important that the sensing element cable is
mechanically separated from the power wiring.
When installing remote-mount electronics, you must use
the Drexelbrook supplied coaxial cable. The cable can be
a maximum of 150 feet (46 meters). Termination kits are
available to shorten the cable if necessary.
Drexelbrook, Coaxial
General Purpose (GP),
Three Terminal, Cable